Can I use heat without vibration? Is the belt silent?

You can use heat without vibration. The two functions have separate controls.

To use heat on its own

  1. Charge the belt, then disconnect the cable. It will not heat or vibrate while charging.
  2. Hold the flame button for 2 to 3 seconds to turn heat on.
  3. Start on the lowest level. Short presses on the flame button change the heat level.
  4. Leave the vibration button off. Do not press both buttons together.

Photo reminder of the worn belt with a larger controller detail. The flame button starts heat; leave vibration off.

The red lights on the inside turn on with heat. There is no separate red-light button.

Will it make a sound?

Vibration makes sound. We do not promise silent use. If you do not want vibration, leave that function off.

If you hear a new grinding or rattling sound, stop using the belt and email support@daywick.com with your order number and a description of the sound. Do not keep running it just to record the noise.

The belt switches off after 15 minutes. Use it while awake and take it off before sleeping.

If it does not respond to the controls, see troubleshooting.

Related articles

How do I charge and use the Hip Therapy Belt? How do I wear the Hip Therapy Belt? My belt will not turn on, heat, vibrate, or show red light Why does the belt switch off after 15 minutes? Will the belt treat my condition or replace surgery?